650 tons two-shot injection moulding machine Krauss-Maffei with turning table and robot. Built in 2011, approx. 46.000 working hours. Machine will be delivered complete checked and tested from our workshop.
| Technical details | |
|---|---|
| CLAMPING FORCE | 6.500 kN |
| DISTANCE BETWEEN TIE BARS (h x v) | 1.000 x 930 mm |
| MIN. MOULD HIGHT | 600 mm |
| TRAVEL OPENING | 1.150 mm |
| DAYLIGHT MAX | 1.750 mm |
| SCREW DIAMETER | 1.) 70 mm |
| INJECTION VOLUMEN | 1.080 cm3 |
| INJECTION PRESSURE | 1.900 bar |
| SCREW DIAMETER | 2.) 50 mm |
| INJECTION VOLUMEN | 393 cm3 |
| INJECTION PRESSURE | 1.900 bar |
| NOMINAL CAPACITY OF PUMP MOTOR | 75 kW |
| INSTALLED HEATING CAPACITY | 29 + 15 kW |
