Pol. Industrial de Heras, Parcela 270
39792 HERAS (Cantabria)

Our own and third-party cookies allow us to improve our services. By browsing our website, you accept our use of cookies.
Cookies Policy

News

Home > News


The technical team at UK Transitus S.L. begins the assembly and commissioning operations of an Engel injection machine with 3,200 tons of closing force.

The technical team at UK Transitus S.L. begins the assembly and commissioning operations of an Engel injection machine with 3,200 tons of closing force.

The technical team at UK Transitus S.L. begins the assembly and commissioning operations of an Engel injection machine with 3,200 tons of closing force.

An operation directed by Jan Krichbaum and which began last March in southern Germany, was a challenge from a logistical point of view.

Our six technicians sent to Germany carried out the disassembly and loading of the 190-ton injection machine, for which it was necessary to coordinate the work according to the 4 special transports and six trucks necessary to transport this equipment. After receipt by our client, we begin the assembly and commissioning work.

Our technical and administrative team is coordinated to guarantee the success of this operation. The full satisfaction of our customers will always be our goal at UK Transitus S.L.

Continue reading
94 Hits

Attention

Attention

Danger

Do you want to avoid that the injection molding machine you bought

Will it be more expensive than you imagined when you bought it?

Then refrain from buying a machine on the internet without. To have checked this in function!

Common damages on these machines are:

  • Defective electronic components, worm plasticizing units, Problematic proportional valves.

You can avoid all this if you have a partially or completely overhauled machine.

Buy a machine that you can still test under power from the seller.

We at TRANSITUS have been selling for more than 40 years.

Refurbished machines, which you can test in our workshop in all functions. In addition, we offer you the commissioning of the corresponding machine in your factory.

Please remember: The cheap can often become expensive!

TRANSITUS, S.L.

Continue reading
727 Hits

Krauss-Maffei 3200-17200 MX

Krauss-Maffei 3200-17200 MX

Brand : KRAUSS-MAFFEI 


Year of building : 2006

 

Summary

IMM Krauss-Maffei de 3.200 tons clamping force, still in function . magnétic platen Year 2006

Continue reading
496 Hits

ENGEL Victory 1050/260 Tech

ENGEL Victory 1050/260 Tech

Brand : ENGEL 


Year of building : 2011

Summary

Engel IMM model Victory 1050/260. Year 2011 with 42500 working hours. The machine will be full checked tested and reconditioned by our personal. We could offer also the start up of the machine in your factory!

Description
Technical details  
YEAR OF BUILDING 2011
WORKING HOURS 46500
SCREW DIAMETER 60mm
CLAMPING FORCE 2.600 kN
INJECTION VOLUMEN 608 cm3
INJECTION PRESSURE 1.725 bar
TRAVEL OPENING 907 mm
Continue reading
766 Hits

Engel VC 330/80 Phoenix

Engel VC 330/80 Phoenix

Brand : ENGEL

Year of building : 2003

Summary

Engel VC 330/80 Phonex year 2003 Machine will be delivered full checked tested and reconditioned in the workshop of Transitus. We can also offer the start up of the machine in your factory with working condition warranty. Extras: 1 Core Puller in mov platen, 23 zones of hot Chanel in the control. Integrated robot connexion. 

Continue reading
666 Hits

Recondition machines

The sequence of our work when reconditioning a machine consists of the following points.

View Information

1

General cleaning of the whole Injector and replacement of broken parts.

2

Checking, repairing and adjusting the electrical system.


3

Hydraulic system check.

4

Mechanical functional check.

5

Safe Shipment.