Pol. Industrial de Heras, Parcela 270
39792 HERAS (Cantabria)

Guess what?
Cookies!

galletas

We use essential cookies to offer you a better website experience. We would like to use other cookies to analyse our website performance and personalise our offers, but only if you agree.

Learn more about your options in our Cookie Policy

Cookies Preference

This website uses the following types of services.
Cookie Policy

News

Home > News


The technical team at UK Transitus S.L. begins the assembly and commissioning operations of an Engel injection machine with 3,200 tons of closing force.

The technical team at UK Transitus S.L. begins the assembly and commissioning operations of an Engel injection machine with 3,200 tons of closing force.

The technical team at UK Transitus S.L. begins the assembly and commissioning operations of an Engel injection machine with 3,200 tons of closing force.

An operation directed by Jan Krichbaum and which began last March in southern Germany, was a challenge from a logistical point of view.

Our six technicians sent to Germany carried out the disassembly and loading of the 190-ton injection machine, for which it was necessary to coordinate the work according to the 4 special transports and six trucks necessary to transport this equipment. After receipt by our client, we begin the assembly and commissioning work.

Our technical and administrative team is coordinated to guarantee the success of this operation. The full satisfaction of our customers will always be our goal at UK Transitus S.L.

Continue reading
332 Hits

Attention

Attention

Danger

Do you want to avoid that the injection molding machine you bought

Will it be more expensive than you imagined when you bought it?

Then refrain from buying a machine on the internet without. To have checked this in function!

Common damages on these machines are:

  • Defective electronic components, worm plasticizing units, Problematic proportional valves.

You can avoid all this if you have a partially or completely overhauled machine.

Buy a machine that you can still test under power from the seller.

We at TRANSITUS have been selling for more than 40 years.

Refurbished machines, which you can test in our workshop in all functions. In addition, we offer you the commissioning of the corresponding machine in your factory.

Please remember: The cheap can often become expensive!

TRANSITUS, S.L.

Continue reading
1152 Hits

Krauss-Maffei 3200-17200 MX

Krauss-Maffei 3200-17200 MX

Brand : KRAUSS-MAFFEI 


Year of building : 2006

 

Summary

IMM Krauss-Maffei de 3.200 tons clamping force, still in function . magnétic platen Year 2006

Continue reading
701 Hits

ENGEL Victory 1050/260 Tech

ENGEL Victory 1050/260 Tech

Brand : ENGEL 


Year of building : 2011

Summary

Engel IMM model Victory 1050/260. Year 2011 with 42500 working hours. The machine will be full checked tested and reconditioned by our personal. We could offer also the start up of the machine in your factory!

Description
Technical details  
YEAR OF BUILDING 2011
WORKING HOURS 46500
SCREW DIAMETER 60mm
CLAMPING FORCE 2.600 kN
INJECTION VOLUMEN 608 cm3
INJECTION PRESSURE 1.725 bar
TRAVEL OPENING 907 mm
Continue reading
1013 Hits

Engel VC 330/80 Phoenix

Engel VC 330/80 Phoenix

Brand : ENGEL

Year of building : 2003

Summary

Engel VC 330/80 Phonex year 2003 Machine will be delivered full checked tested and reconditioned in the workshop of Transitus. We can also offer the start up of the machine in your factory with working condition warranty. Extras: 1 Core Puller in mov platen, 23 zones of hot Chanel in the control. Integrated robot connexion. 

Continue reading
859 Hits

Krauss-Maffei KM 800-8100 MC

Krauss-Maffei KM 800-8100 MC

KRAUSS-MAFFEI KM 800-8100 MC, year 2003 Machine will be delivered reconditioned and can be shown under power !

Continue reading
829 Hits

Transitus opens its new mechanical workshop

Transitus opens its new mechanical workshop

Transitus inaugurates a new mechanical workshop with an exhibition area for reconditioned machinery of 900 m2, with a mechanical workshop and a warehouse for hydraulic, mechanical and electrical spare parts.

We have offers in reconditioned machines of leading Injection brands, Krauss-Maffei, Engel, Arburg, Demag. In addition, we offer commissioning at the customer's facilities.

At Transitus we have a specialized technical team with more than 20 years of experience.

Continue reading
892 Hits

KM 650-2000+750 CX Z

KM 650-2000+750 CX Z

Year of building : 0

Summary

650 tons two-shot injection moulding machine Krauss-Maffei with turning table and robot. Built in 2011, approx. 46.000 working hours. Machine will be delivered complete checked and tested from our workshop.

Continue reading
903 Hits

ENGEL ES 330/80

ENGEL ES 330/80

IMM ENGEL 330/80, year 2007 with picker. The machine will be delivered complete checked and tested in our workshop. Can be shown under power.

Continue reading
933 Hits

Engel Duo 17060H/1560W/2700 Combi

Engel Duo 17060H/1560W/2700 Combi

Brand : ENGEL 

Summary

 

Bimaterial IMM Brand Engel type Duo 17060H/1560W/2700 Combi Year 2019, still in production. Second injection unit Piggy Pack with rotary table. Inyectora bimateria Marca Engel modelo Duo 17060H/1560W/2700 Combi del año 2019 aún en producción. Dispone de mesa giratoria en el plato móvil.

Continue reading
1157 Hits

Husky Q 1350

Husky Q 1350

Brand : Husky

Summary

Husky Q injection molding machine with 1,300 tonnes of closure. Extras: two programmable cores on the movable plate + central ejector (with bar) On movable plate you have a programmable pneumatic valve for injection, On movable plate eight programmable pneumatic sequential valves (16 bar). The machine has a special cooling optimization for the oil.

Continue reading
1231 Hits

Engel ES 650H200W/200 HL

Engel ES 650H200W/200 HL

Brand : ENGEL

Year of building : 2002

Summary

200 tons ENGEL 2-shot tie bar less injection moulding machine with rotary table on moving platen. Machine will be tested, repaired and checked and can be shown under power !

Description

ENGEL tie/bar/less 200 tons two component. Year 2002. rotary table 900mm diameter. 2 core pullers in fix platt, Neumatic Valves, electronically mould flow meter Oni. 16 hot Chanel, 2 hydraulic sequential. Machine reconditioned in our workshop of Santander, you can see it working.

Continue reading
1183 Hits

DEMAG Titan 1100/1570/9000

DEMAG Titan 1100/1570/9000

Brand : DEMAG

Year of building : 2006

Summary

DEMAG Titan de 1.100 tons year 2006 with robot Wittmann, screw diam. 110 mm

Continue reading
1065 Hits

ENGEL

ENGEL

Brand : ENGEL


Year of building : 2002

Summary

600 tons ENGEL tie-bar less IMM, year 2002

Continue reading
1214 Hits

Engel VC 500/220 Tech

Engel VC 500/220 Tech

Brand : ENGEL


Year of building : 2005

Summary

Horizontal Injection Moulding Machine, year 2005, only 33000 working hours, very good condition. Still we are working to make it full reconditioned checked and tested. With robot ERC and security jail. 2 Core Puller, hot runner zones.

Continue reading
1210 Hits

DEMAG ET 500-2300

DEMAG ET 500-2300


Brand : DEMAG


Year of building : 2000

Summary

500 tons DEMAG injection moulding machine from year 2.000

Description

 

Technical details  
YEAR OF BUILDING 2000
WORKING HOURS aprox. 79.600
CLAMPING FORCE 5.000 kN
Continue reading
1168 Hits

ENGEL ES 2550/400 HL

ENGEL ES 2550/400 HL

Brand : ENGELENGEL

Year of building : 2004

Summary

400 tons ENGEL tie-bar-less IMM built in 2004

Technical details  
INSTALLED HEATING CAPACITY 34 kW
YEAR OF BUILDING 2004
WORKING HOURS approx. 65.000
TRAVEL OPENING 950 mm
DAYLIGHT MAX 1.600 mm
SCREW DIAMETER 70 mm
INJECTION PRESSURE 1.820 bar
INJECTION VOLUMEN 1.040 cm3
NOMINAL CAPACITY OF PUMP MOTOR 45 kW
MIN. MOULD HIGHT 650 mm
PLATEN SIZE 1.400 x 1.030 mm
CLAMPING FORCE 4.000 kN

 

Continue reading
1416 Hits

Krauss-Maffei 175/520C

Krauss-Maffei 175/520C

Brand: KRAUSS-MAFFEI

Year of building: 2002

Continue reading
1184 Hits

ENGEL Viper 20 RC 200 integrated

ENGEL Viper 20 RC 200 integrated

Brand: ENGEL

Year of building: 2012 ( never used ) New

Continue reading
1407 Hits

Husky1650 Quadloc

Husky1650 Quadloc

Brand: Husky

Year of building: 2002

Summary

Injection Moulding machine 1600 Tons of clamping force incl. robot TE 14

Continue reading
1410 Hits

Sepro Robot

Sepro Robot

Brand: Sepro

Year of building : 12/2000

Summary

SEPRO Robot 3051 BZ PIB 7843 X = 4.000 mm, Y = 1.200 mm, Z = 2.300 mm

Continue reading
1399 Hits

ENGEL ERC 74/2-E (2004)

ENGEL ERC 74/2-E (2004)

Brand: ENGEL

Year of building: 2004

Summary

ENGEL ERC 74/2-E integrated robot built in 2004 with its own electrical cabinet, machine complete checked.

Continue reading
1458 Hits

KRAUSS-MAFFEI 175-520-220 CZ

KRAUSS-MAFFEI 175-520-220 CZ

Brand : KRAUSS-MAFFEI

Year of building: 2002

Summary

Reconditioned 2-Component Krauss-Maffei injection moulding machine with Robot Sepro


Description

Technical details  
CLAMPING FORCE 1750 kN
PLATEN SIZE 915 x 915 mm
DISTANCE BETWEEN TIE BARS (h x v) 560 x 560 mm
MIN. MOULD HIGHT 350 mm
TRAVEL OPENING 700 mm
SCREW DIAMETER 1) 45 mm (SP 520)
SCREW DIAMETER 2) 40 mm (Sp 220)
YEAR OF BUILDING 2002
DAYLIGHT MAX 1050
INJECTION VOLUMEN 151 cm3 (Sp 220)
INJECTION VOLUMEN 275 cm3 (Sp 520)
INJECTION PRESSURE 1878 BAR (Sp 520)
INJECTION PRESSURE 1406 BAR (Sp 220)
SHOTWEIGHT 137 gr (Sp 220)
SHOTWEIGHT 250 gr (Sp 520)
Continue reading
1364 Hits

Plastizising unit for DEMAG injection moulder

Plastizising unit for DEMAG injection moulder

For sale: Plastizising unit (2300) for Demag Ergotech injection moulding machines. Very good condition and complete. Screw diam

Continue reading
1432 Hits

ENGEL Victory 1050/300 power (2007)

ENGEL Victory 1050/300 power (2007)

For sale: Engel Victory 1050/300 built in 2007 incl. Engel ERC robot and mould loading crane.

Machine complete checked and tested. Can be shown under power. Shortly available !

 

Continue reading
1558 Hits

Krauss-Maffei bolt on

Krauss-Maffei bolt on

Independent bolt on device (vertical) of Krauss-Maffei (vertik¡cal) to convert all injection moulding machines in 2 shot or two colour machines.

With it own MC 4 control and own hydraulic. For sale in very good condition

Continue reading
1454 Hits

Engel Victory 330/60 Tech

Engel Victory 330/60 Tech

Brand : ENGEL

Year of building: 2003

Summary

Engel 60 to tie-bar less IMM increased clamping force to 800 kN by Engel. Machine complete checked and tested an with new cast body on clamping side.

Continue reading
2001 Hits

Engel 1.300 2 Komponenten Maschine Baujahr 2007

Wir verkaufen eine Engel 1.300 to 2 Komponenten Spritzgiessmaschine (ohne Drehteller) aus Baujahr 2007.

Diese Maschine war ursprünglich eine 1.500 to 1 Komponenten Maschine, wurde jedoch von Engel auf

2 Komponenten umgerüstet und die Schliesskraft aus Sicherheitsgründen auf 1.300 to reduziert.

Ausrüstung: 60 externe Heisskanalzonen, 2 Kernzüge, 1 Yudo Linear Roboter.

Maschine nich in Betrieb auf einer Komponente !

Continue reading
3505 Hits

Engel robot Viper 20 Speed

Engel robot Viper 20 Speed

Marke: ENGEL

Baujahr: 2010

Zusammenfassung

Engel robot Viper 20 Speed, kann auf alle engel Spritzgiessmaschinen montiert werden. Nurca. 13.000 working Betriebsstunden.

Beschreibung

X-axis: 500 mm, Y-axis 800 mm, Z-axis 3.320 mm

Technische Details  
BAUJAHR 2010
Continue reading
1612 Hits

ARBURG 520 C 2000-675

ARBURG 520 C 2000-675

Brand: ARBURG

Year of building: 2000

Summary

ARBURG 520 C 2000-675 injection, moulding machine., year of building 2000, approx. 56.286 working hours. This machine will be delivered completly checked repaired and tested and can be shown under power. New screw and barrel.

Technical details  
PLATEN SIZE 720 x 720 mm
DISTANCE BETWEEN TIE BARS (h x v) 520 x 520 mm
TRAVEL OPENING 650 mm
MIN. MOULD HIGHT 250 mm
DAYLIGHT MAX 900 mm
SCREW DIAMETER 55 mm
CLAMPING FORCE 2.000 kN
INJECTION VOLUMEN 427 cm3
SHOTWEIGHT 360 PS
INJECTION PRESSURE 1720 BAR
YEAR OF BUILDING 2000
WORKING HOURS 56.286
Continue reading
1894 Hits

ENGEL DUO 4550/900

ENGEL DUO 4550/900

Brand : ENGEL

Year of building: 2007

Summary

ENGEL DUO 4550/900 clamping force 9.000 kN built in 2007.

Description

This machine will be delivered "reconditioned in the end of April.

 

Technical details  
CLAMPING FORCE 9.000 kN
MIN. MOULD HIGHT 400 - 1.000 mm
DISTANCE BETWEEN TIE BARS (h x v) 1.170 x 1.000 mm
SCREW DIAMETER 80 mm
WORKING HOURS aprox. 48.781
YEAR OF BUILDING 2007
Continue reading
2107 Hits

Recondition machines

The sequence of our work when reconditioning a machine consists of the following points.

View Information

1

General cleaning of the whole Injector and replacement of broken parts.

2

Checking, repairing and adjusting the electrical system.


3

Hydraulic system check.

4

Mechanical functional check.

5

Safe Shipment.