Home > News
Brand : ENGEL
Year of building : 2004
400 tons ENGEL tie-bar-less IMM built in 2004
| Technical details | |
|---|---|
| INSTALLED HEATING CAPACITY | 34 kW |
| YEAR OF BUILDING | 2004 |
| WORKING HOURS | approx. 65.000 |
| TRAVEL OPENING | 950 mm |
| DAYLIGHT MAX | 1.600 mm |
| SCREW DIAMETER | 70 mm |
| INJECTION PRESSURE | 1.820 bar |
| INJECTION VOLUMEN | 1.040 cm3 |
| NOMINAL CAPACITY OF PUMP MOTOR | 45 kW |
| MIN. MOULD HIGHT | 650 mm |
| PLATEN SIZE | 1.400 x 1.030 mm |
| CLAMPING FORCE | 4.000 kN |
Brand: Husky
Year of building: 2002
Summary
Injection Moulding machine 1600 Tons of clamping force incl. robot TE 14
Brand: Sepro
Year of building : 12/2000
Summary
SEPRO Robot 3051 BZ PIB 7843 X = 4.000 mm, Y = 1.200 mm, Z = 2.300 mm
Brand: ENGEL
Year of building: 2004
Summary
ENGEL ERC 74/2-E integrated robot built in 2004 with its own electrical cabinet, machine complete checked.
Brand : KRAUSS-MAFFEI
Year of building: 2002
Summary
Reconditioned 2-Component Krauss-Maffei injection moulding machine with Robot Sepro
Description
| Technical details | |
|---|---|
| CLAMPING FORCE | 1750 kN |
| PLATEN SIZE | 915 x 915 mm |
| DISTANCE BETWEEN TIE BARS (h x v) | 560 x 560 mm |
| MIN. MOULD HIGHT | 350 mm |
| TRAVEL OPENING | 700 mm |
| SCREW DIAMETER | 1) 45 mm (SP 520) |
| SCREW DIAMETER | 2) 40 mm (Sp 220) |
| YEAR OF BUILDING | 2002 |
| DAYLIGHT MAX | 1050 |
| INJECTION VOLUMEN | 151 cm3 (Sp 220) |
| INJECTION VOLUMEN | 275 cm3 (Sp 520) |
| INJECTION PRESSURE | 1878 BAR (Sp 520) |
| INJECTION PRESSURE | 1406 BAR (Sp 220) |
| SHOTWEIGHT | 137 gr (Sp 220) |
| SHOTWEIGHT | 250 gr (Sp 520) |
Brand : ENGEL
Year of building: 2003
Summary
Engel 60 to tie-bar less IMM increased clamping force to 800 kN by Engel. Machine complete checked and tested an with new cast body on clamping side.
Wir verkaufen eine Engel 1.300 to 2 Komponenten Spritzgiessmaschine (ohne Drehteller) aus Baujahr 2007.
Diese Maschine war ursprünglich eine 1.500 to 1 Komponenten Maschine, wurde jedoch von Engel auf
2 Komponenten umgerüstet und die Schliesskraft aus Sicherheitsgründen auf 1.300 to reduziert.
Ausrüstung: 60 externe Heisskanalzonen, 2 Kernzüge, 1 Yudo Linear Roboter.
Maschine nich in Betrieb auf einer Komponente !
Marke: ENGEL
Baujahr: 2010
Zusammenfassung
Engel robot Viper 20 Speed, kann auf alle engel Spritzgiessmaschinen montiert werden. Nurca. 13.000 working Betriebsstunden.
Beschreibung
X-axis: 500 mm, Y-axis 800 mm, Z-axis 3.320 mm
| Technische Details | |
|---|---|
| BAUJAHR | 2010 |
Brand: ARBURG
Year of building: 2000
Summary
ARBURG 520 C 2000-675 injection, moulding machine., year of building 2000, approx. 56.286 working hours. This machine will be delivered completly checked repaired and tested and can be shown under power. New screw and barrel.
| Technical details | |
|---|---|
| PLATEN SIZE | 720 x 720 mm |
| DISTANCE BETWEEN TIE BARS (h x v) | 520 x 520 mm |
| TRAVEL OPENING | 650 mm |
| MIN. MOULD HIGHT | 250 mm |
| DAYLIGHT MAX | 900 mm |
| SCREW DIAMETER | 55 mm |
| CLAMPING FORCE | 2.000 kN |
| INJECTION VOLUMEN | 427 cm3 |
| SHOTWEIGHT | 360 PS |
| INJECTION PRESSURE | 1720 BAR |
| YEAR OF BUILDING | 2000 |
| WORKING HOURS | 56.286 |
Brand : ENGEL
Year of building: 2007
Summary
ENGEL DUO 4550/900 clamping force 9.000 kN built in 2007.
Description
This machine will be delivered "reconditioned in the end of April.
| Technical details | |
|---|---|
| CLAMPING FORCE | 9.000 kN |
| MIN. MOULD HIGHT | 400 - 1.000 mm |
| DISTANCE BETWEEN TIE BARS (h x v) | 1.170 x 1.000 mm |
| SCREW DIAMETER | 80 mm |
| WORKING HOURS | aprox. 48.781 |
| YEAR OF BUILDING | 2007 |
The sequence of our work when reconditioning a machine consists of the following points.
View InformationGeneral cleaning of the whole Injector and replacement of broken parts.
Checking, repairing and adjusting the electrical system.
Hydraulic system check.
Mechanical functional check.
Safe Shipment.
